Chevrolet Spark manuals

Mazda CX-5 Owners Manual: Theft-Deterrent System

If the theft deterrent system detects an inappropriate entry into the vehicle, which could result in the vehicle or its contents being stolen, the alarm alerts the surrounding area of an abnormality by sounding the horn and flashing the hazard warning lights.

The system will not function unless it's properly armed. So when you leave the vehicle, follow the arming procedure correctly.

Operation

System triggering conditions

The horn sounds intermittently and the hazard warning lights flash for about 30 seconds when the system is triggered by any one of the following:

Unlocking a door with the door lock switch or an inside door-lock knob.

Forcing open a door, the hood or the liftgate.

Opening the hood by operating the hood release handle.

Switching the ignition ON without using the push button start.

If the system is triggered again, the lights and horn will activate until the driver's door or the liftgate is unlocked with the auxiliary key or with the transmitter.

(With advanced key)

The lights and horn can also be deactivated by pressing the request switch on a door.

NOTE

If the battery goes dead while the theftdeterrent system is armed, the horn will activate and the hazard warning lights will flash when the battery is charged or replaced.

How to Arm the System

1. Close the windows and the moonroofí securely.

2. Press the push button start off.

3. Make sure the hood, the doors, and the liftgate are closed.

4. Press the lock button on the transmitter or lock the driver's door from the outside with the auxiliary key.

The hazard warning lights will flash once.

The following method will also arm the theft-deterrent system: Press the door-lock switch “ ” while
any door is open and then close all of the doors.

(With the advanced keyless function)

Press a request switch.

The security indicator light in the instrument panel flashes twice per second for 20 seconds.

Refer to Warning/Indicator Lights on .


5. After 20 seconds, the system is fully armed.

NOTE

The theft deterrent system can also be armed by activating the auto relock function with all the doors, the liftgate and the hood closed.

The system will disarm if one of the following operations takes place within 20 seconds after pressing the lock button:

Unlocking a door.

Any door or the liftgate is opened.

The hood is opened.

The ignition is switched on.

(With the advanced keyless function) Press the electric liftgate opener while the key is being carried.

To rearm the system, do the arming procedure again.

When the doors are locked by pressing the lock button on the transmitter or using the auxiliary key while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.

To Turn Off an Armed System

An armed system can be turned off using any one of the following methods:

Unlock the driver's door with the auxiliary key.

Press the unlock button on the transmitter.

Switch the ignition ON.

(With the advanced keyless function) Press a request switch on the doors.

The hazard warning lights will flash twice.

NOTE

When the doors are unlocked by pressing the unlock button on the transmitter or using the auxiliary key while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.

To Stop the Alarm

A triggered alarm can be turned off using any one of the following methods:

Unlock the driver's door with the auxiliary key.

Press the unlock button on the transmitter.

The engine is started with the push button start.

(With the advanced keyless function) Press a request switch on the doors.

Press the electric liftgate opener while the key is being carried.

The hazard warning lights will flash twice.

Theft-Deterrent Labels


A label indicating that your vehicle is equipped with a Theft-Deterrent System is in the glove compartment.

Mazda recommends that you affix it to the lower rear corner of a front door window.

Immobilizer System
The immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helpi ...

Driving Tips
...

Other materials:

Tie Rod End Replacement
1. Remove the snap pin. 2. Loosen the tie-rod end locknut. 3. Detach the tie-rod end from the steering knuckle using the SST. 4. Remove the tie-rod end locknut. 5. Place alignment marks as shown in the figure for proper installation. 6. Remove the tie-rod end. 7. Align th ...

Front Brake (Disc)
Purpose/Function Large diameter, ventilated disc type front brakes with a 297 mm {11.7 in} diameter and 28 mm {1.1 in} thickness have been adopted, improving braking force and fade resistance. Construction Operation When brake fluid is applied, the piston equipped on o ...

Air Bag Module And Pre Tensioner Seat Belt Deployment Procedures [Standard Deployment Control System]
WARNING: A live (undeployed) air bag module or pre-tensioner seat belt may accidentally operate (deploy) when it is disposed of and cause serious injury. Do not dispose of a live (undeployed) air bag module or pre-tensioner seat belt. If the SSTs (Deployment tool and Adapter harness ...

© 2016-2024 Copyright www.mcx5.org